Russound MCA-C3, User And Installation Manual, Page: 119 / 231

MCA-C3 Test Procedure
Page 77 of 77
Changes made from First Draft to Rev 1.1 on Jun 26, 2010
Section 10. Program BootLoader added Step 1 to ensure jumper is placed on
J22 so that Device Update section would not fail.
Section 12. Tuner MCU Firmware was reworded to make the test clearer to
understand. Read this section to understand the changes.
Changes made from Rev 1.1 to Rev 1.2 on September 20, 2010
You must use
MCA-C3v1.xml test scripts
with MCA-C3 Test Procedure 1.2
Section 36. WOL_IRQ added the following to Step 5:
Press the power button on MDK-C5 Rev 1 Zone 1 to turn it on.
MDK-C5 Rev 1 Zone 1 will illuminate and display “One”.
(This prevents the MCA-C3 from going to sleep every 15 seconds)
Section 36. WOL_IRQ second line changed to 10 seconds for Step 2:
All MDK-C5 Keypads will turn off (go dark) and the clock is not visible.
Ten seconds later D36 on the Digital Board will go dark
and you hear a relay click in the MCA-C3. (The MCA-C3 is in Sleep Mode).