3
AirGo.russound.com
INSTALLATION
Figure 2
APX Cover
#2 Phillips
Screw
#2 Phillips
Screw
AirPort Express
Status Light
Removing the APX cover
To begin, unravel the AirGo Outdoor’s main power
cord and remove the APX cover. Use a standard
Phillips screwdriver to remove the two Phillips screws
that secure the APX cover in place. Don’t worry about
loosing the screws, they’re captive screws so they
won’t fall out. Be careful not to dislodge the gasket
that is fitted to the APX cover. It is important that it be
intact when reinstalling the cover to keep moisture out
of the APX Pocket. See
figure 2
Configuration of the AirPort Express
®
The AirPort Express will need to be configured before
it is installed in the APX Pocket. Please refer to the
AirPort Express installation manual for complete
directions.