Russell Hobbs Steam & Clean Pro RHDSM2001, Manual, Page: 12 / 24

12
USING YOUR STEAM MOP
To recline the handle, place your foot over the shoe
symbol on the side of the mop head and gently pull
the handle downwards.
Cleaning hard floors
Pull trigger on the handle ( 1 ) to release the steam.
Move the steam mop backwards and forwards
across the floor (
2 ). For stubborn dirt or stains, focus
the steam mop over the area for a few seconds.
Note: Do not leave the steam mop over one area for
more than a few seconds. This can damage the floor.
Refreshing carpets
Pads can be used for both functions but must be
washed after using detergent on hard floors, before
cleaning carpets.
Place the mop head into the carpet glider ( 1 ).
Note: The mop head does not attach to the carpet
glider but just sits in it. Pull the trigger on the handle
(
2 ) to release the steam.
WARNING: Do not use detergent on carpets.
Detergent can stain and damage carpets.
Move the steam mop backwards and forwards
across the carpet, again paying particular attention
to well trodden and frequently used areas.
When not using the mop, place it on the cooling
tray provided.