10
USING: FILLING THE DETERGENT TANK
Grip the sides of the detergent tank on the
front of the steam mop and pull upwards to
remove.
Remove the cap on the top of the detergent
tank by turning it anti-clockwise and lifting.
Fill the tank, using the filler cup with 30ml of
detergent & 150ml of water. Screw the cap back onto
the tank by turning it clockwise.
Again, turn the tank upside down over a sink.
IMPORTANT:
Only use recommended detergent solution. Detergent must be
diluted with water as per the above instructions. Always cover food preparation
areas and remove food from all surfaces. Do not clean surfaces that come into
direct contact with food.
Slot the detergent tank back onto the steam
mop. Push down on the tank until it locks in
place.
Summary of Contents for Steam & Clean Pro RHDSM2001
Page 23: ...23 NOTES...