background image

Read the instructions before use and keep them safe. If you pass the processor 

on, make sure to pass on the instructions too. Remove all packaging, but keep  

it till you’re satisfied the processor is working.

important safeguards 

When using electrical appliances, basic safety precautions should always be 

followed including the following:

 1.  Read all instructions.

 2.  To protect against risk of electrical shock do not put food processor in  

    water or other liquid.

 3.  This appliance must only be used by a responsible adult.

 4.  Unplug the unit from the power supply when not in use, before putting 

    on or taking off parts, and before cleaning.

 5.  Avoid contact with moving parts.

 6.  Do not operate any appliance with a damaged cord or plug after the 

    appliance malfunctions, or is dropped or damaged in any manner.    

 

    Return appliance to the nearest authorized service facility for examination, 

    repair or electrical or mechanical adjustment.

 7.  The use of attachment not recommended or sold by the manufacturer may   

    cause fire, electric shock or injury.

 8.  Do not use outdoors.

 9.  Do not let cord hang over edge of table or counter.

 10. Keep hands and utensils away from moving blades or discs while processing

    food to reduce the risk of severe injury to person or damage to the food 

    processor. A scraper may be used but must be used only when the food 

    processor is not running. 

 11. Blades are sharp. Handle with care.

 12. To reduce the risk of injury, never place cutting blade or discs on base  

 

    without first putting bowl properly in place.

 13. Be certain cover is securely locked in place before operating appliance.

 14. Never feed food by hand. Always use food pusher.

 15. Do not attempt to defeat the cover interlock mechanism.

 16. This product is designed for household use only.

 17. This appliance is not intended for use by young children or infirmed persons.  

 18. This appliance is not a toy.

 19. If the supply cord is damaged, it must be replaced by the manufacturer  

 

    or it’s service agent or a similarly qualified person in order to avoid hazard. 

    (Contact Salton Customer Service).

2

Summary of Contents for RHPK1002














Reviews: