Russell Hobbs RHPC3000, Instructions & Warranty, Page: 7 / 52

7
4. Inserting the cooking pot in the
multi cooker
Be sure to remove any food residue
and water droplets from the exterior
of the cooking pot and interior of the
multi cooker.
After placing the cooking pot into
the multi cooker, rotate the cooking
pot slightly left to right to ensure the
pot is in place and there is contact
between the cooking pot and heating
plate.
5. Close the lid
Place the lid onto the multi cooker,
aligning the “ ” marking on the lid
with the “OPEN ” marking on the
multi cooker. Rotate the lid clockwise
until the “ ” marking on the lid
aligns with the “ CLOSE” marking
on the multi cooker.
IMPORTANT: Be sure the lid is fully
locked into place. If the lid is not
in place correctly the multi cooker
will beep.
The “ ” marking on the lid must
align directly with the “ CLOSE”
marking on the multi cooker,
otherwise the multi cooker will not
pressurise.
6. Position the exhaust valve
When cooking, align the handle
of exhaust valve with the sealing
icon, indicating that the multi
cooker is airtight.
7. Insert the Power Cord
Insert the power cord into the socket
provided on the side of the multi
cooker.
Note: When the plug is switched on
at the power outlet, the power will
come on.
Note: if the exhaust valve has not been aligned to the seal icon, pressure will not build up
and you may not achieve desired cooking results.
Seal Position Release Position