1: First base is installed in place of the main stable
2: The head fixed in the main part of the bearing hole
3: Installed guard and blade, and net fixed firmly lock the lookout Network
Filling the water tank
Place the fan on a flat, stable floor, then add water for the humidifying function as follows:
1. Open the water tank 2. Lift out the water tank 3. Take out the water tank.
cover.
4. Over a sink, turn the water 5. Screw off the tank cap, and 6. Screw tank cover tightly, and
tank so the
outlet cap is add water. put it into the fan, then close
facing upwards. panel.
Operation
*
Insert plug to the electrical outlet, and the indicator
light turns on.
*Press “
ON/SPEED”
button to choose the wind for
low, Med, High speed that matches the light on the
control panel.
*Press “
MODE
” to choose the wind type from one
of the following:
“Normal”: Wind flow based on Low/Med/High speed.