background image

1.

 

The unit is packed carefully back into its original packaging. 

2.

 

Proof of purchase is attached. 

3. 

Give the reason why you are returning it.

 

 

 

If the supply cord is damaged, it must be replaced by the manufacturer or its 

service agents in order to avoid a hazard. If service becomes necessary 

within the warranty period the appliance should be returned to an approved 

Tedelex Trading (Pty) Ltd service centre. Servicing outside the warranty 

period is still available, however it will be chargeable. 

 

 

PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE.   

IN THE EVENT OF A CLAIM UNDER WARRANTY, THIS RECEIPT MUST 

BE PRODUCED.   

 

W A R R A N T Y

 

 

Tedelex  Trading  (Pty)  Limited  (“the  Supplier”)  warrants  to  the  original 

purchaser  of  this  product  (“the  Customer”)  that  this  product  will  be  free  of 

defects in material and workmanship which under normal, personal, family or 

household purpose manifest themselves within a period of 365 days from the 

date  of  purchase  or  in  respect  of  commercial  or  professional  purposes, 

manifest  themselves  within  a  period  of  90  days  from  the  date  of  purchase.   

Any claim in terms of the warranty must be supported by a proof of purchase.   

If  such  proof  is  not  available,  then  notwithstanding  anything  to  the  contrary 

herein, the Supplier’s normal charge for service and/or spares will be payable 

by the Customer upon collection of the repaired product.    If a claim is made in 

terms  of  the  aforesaid  warranty  within  the  first  7  days  from  the  date  of 

purchase, the faulty product will be exchanged (provided that the product is in 

its  original  packaging  with  all  accessories).    Failing  return  of  the  product 

within 7 days, the Supplier’s liability shall be limited on return to the Supplier 

of  the  product  or  parts  thereof,  to  the  replacement  or  repair  (in  the  sole 

discretion of the Supplier, or its duly authorised service dealer) of the product 

to  eliminate  any  defect  in  workmanship  or  materials  found  to  be  due 

exclusively  to  any  acts  or  omissions  on  the  parts  of  the  Suppliers,  of  which 

defects the Supplier shall have been notified in writing by the Customer within 

PAGE 11 OF 12 

Summary of Contents for RHI 203













Reviews: