6
HOW TO FILL WITH WATER:
Note:
It is recommended to use purified or mineral water.
Disconnect the iron from the mains supply outlet.
Turn the Steam Control / Self-Cleaning Knob to the
position.
Fill water through the Water Inlet Hole.
Fill up to the
Max
level of the water tank.
BEFORE USING YOUR IRON FOR THE FIRST TIME:
Clean the water tank and the steam vents on the soleplate to remove dust which
may have accumulated during the manufacturing process.
Some vapour may be given off when the iron is first used. This is safe and will
stop after a short time.
Remove protective wrappings and labels from the soleplate and clean it with a
soft, damp cloth.
Fill the iron as described in the HOW TO FILL WITH WATER section.
Place the iron on its heel and connect the iron to a suitable mains supply outlet.
Turn the Temperature Dial to the ‘●●●’ position – the pilot light will start to glow.
The pilot light goes off when the required temperature is reached.
Turn the Steam Control / Self-Cleaning Knob to the
position. Steam will start
to come out of the holes in the soleplate.
Begin first time ironing with an old towel or old cotton garment.
When the water tank is empty and there is no more steam being produced then
the preparation work is complete and the iron is ready for proper use.
DRY IRONING:
Connect the iron to a suitable mains supply outlet.
Turn the Temperature Dial in a clockwise direction to select ‘●’, ‘●●’ or ‘●●●’
according to the recommendation of the garment label.
Move the Temperature Dial in an anti-
clockwise direction to ‘
Min’
when ironing is
complete to switch the iron off.
Disconnect the iron from the mains supply outlet.
