• Alternatively, spread some newspaper on the floor.
• Press the latch and the bottom of the dustbin will drop open dumping the contents into the rubbish
bin, or onto the newspaper.
•
Do not tap the open dustbin on the sides of your rubbish bin as this could result in damage to the
dustbin.
•
Turn the agitator on top of the bin back and forth several times to agitate the inside of the HEPA filter.
This releases excess any dust that might be held in its folds.
• Lift the bottom of the bin up to close it.
CHECK THE FILTERS
• While emptying the bin, check the filters – blocked filters quickly reduce suction.
•
You can see the mesh filter through the side of the bin. You should be able to see the HEPA filter
through the mesh filter.
• If either filter looks clogged or dirty or if you cannot see the HEPA filter clearly, it is time to clean
both filters.
• If they do not need cleaning, refit the bin in the cleaner – put the bottom in first, then gently push
the top down into position. You will hear the locks click into place.
• Check that it is secure.
CLEANING THE VACUUM CLEANER
• Before cleaning, switch the power off and remove the plug from the wall power outlet.
•
Do not put any part of the cleaner in a dishwasher.
•
Do not use harsh or abrasive cleaning agents or solvents.
• Wipe external surfaces with a damp cloth. A dab of washing-up liquid will remove stubborn stains.
•
Wipe the tools with a damp cloth or hand wash in warm soapy water. Rinse under a running tap
to remove all traces of soap, then let air dry – do NOT refit until they are completely dry.
•
Wipe the extendable tube and hose with a damp cloth. Check they are dry before refitting. Do not
put them in water, you will damage them.
•
Wash the dust bin in warm soapy water with a soft cloth or sponge (remove all filters first). Rinse
to remove all traces of soap, then let it air dry – do NOT refit until it is completely dry.
CLEANING THE FILTERS
While emptying the dust bin, check the filters – blocked filters quickly reduce suction.
Make sure the space you are using is protected with an old towel or some newspaper
as this process can be messy.
• Grip the bin lid with one hand, grip the bin with the other, and turn the lid of the bin to move
the
|
mark on the lid from the around to the .
• Lift the lid and filter assembly out of the bin and turn them upside down.
• Turn the filter assembly clockwise to unlock it
8
CheCk the filters
• While emptying the bin, check the filters – blocked filters quickly reduce suction.
•
You can see the mesh filter through the side of the bin. You should be able to see
the HEPA filter through the mesh filter.
• If either filter looks clogged or dirty or if you cannot see the HEPA filter clearly, it is
time to clean both filters.
• If they do not need cleaning, refit the bin in the cleaner – put the bottom in first,
then gently push the top down into position. You will hear the locks click into place.
• Check that it is secure.
Cleaning the vaCuum Cleaner
• Before cleaning, switch the power off and remove the plug from the wall power outlet.
• Do not put any part of the cleaner in a dishwasher.
• Do not use harsh or abrasive cleaning agents or solvents.
• Wipe external surfaces with a damp cloth. A dab of washing-up liquid will remove
stubborn stains.
• Wipe the tools with a damp cloth or hand wash in warm soapy water. Rinse under
a running tap to remove all traces of soap, then let air dry – do NOT refit until they
are completely dry.
• Wipe the extendable tube and hose with a damp cloth. Check they are dry before
refitting. Do not put them in water, you will damage them.
• Wash the dust bin in warm soapy water with a soft cloth or sponge (remove all
filters first). Rinse to remove all traces of soap, then let it air dry – do NOT refit until
it is completely dry.
Cleaning the filters
While emptying the dust bin, check the filters – blocked filters quickly reduce suction.
Make sure the space you are using is protected with an old towel or some newspaper
as this process can be messy.
• Grip the bin lid with one hand, grip the bin with the other, and turn the lid of the bin
to move the | mark on the lid from the around to the .
• Lift the lid and filter assembly out of the bin and turn them upside down.
• Turn the filter assembly clockwise to unlock it and lift it off to expose the HEPA filter.
•
Lift the HEPA filter up and out of the lid.
HEPA
filter
filter
assembly
mark
mesh filter
