Russell Hobbs RHEM42G, Instructions And Warranty

Page: 8 / 33

8
•
PLEASE NOTE: If the microwave appliance is not maintained in a
good state of cleanliness, its surface could become degraded, its
lifespan affected and could result in a possibly hazardous situation.
INSTALLATION
1. Make sure that all the packing materials are removed from the inside of
the door.
2. WARNING: Check the oven for any damage, such as misaligned or bent
door, damaged door seals and sealing surface, broken or loose door
hinges and latches and dents inside the cavity or on the door. If there is
any damage, do not operate the oven and contact qualified service
personnel.
3. This microwave oven must be placed on a flat, stable surface to hold its
weight and the heaviest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or high humidity are
generated, or near combustible materials.
5. For correct operation, the oven must have sufficient airflow. Allow 30cm of
space above the oven, 20cm at back and 20cm at both sides. Do not
cover or block any openings on the appliance. Do not remove feet.
6. Do not operate the oven without a glass tray, roller support, and shaft in
their proper positions.
7. Make sure that the power supply cord is undamaged and does not run
under the oven or over any hot or sharp surface.
8. The socket must be readily accessible so that it can be easily unplugged
in an emergency.
9. Blocking the intake and/or outlet openings can damage the oven.
10. Remove any protective film found on the microwave cabinet surface.
Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
11. Never place the glass tray upside down. The glass tray should never be