Russell Hobbs RHDH1001, Manual, Page: 14 / 24

•
When you remove the water tank, do not touch any parts inside of
the unit. Doing so may damage the product.
•
Be sure to push the water tank gently all the way into the unit.
Banging the tank against anything or failing to push it in securely
may cause the unit not to operate.
•
When you remove the water tank, if there is some water in the unit
you must dry it .
Continuous Draining
•
Water can be automatically emptied into a floor drain by attaching
the unit with a inner diameter 13.5mm hose .
•
Remove the rubber bung from the Drain Hose Outlet on the back of
the unit.
•
Attach the hose into the Drain Hose Outlet in the back of the unit as
shown below.
•
Lead the water hose to a suitable drainage facility. The drainage
facility should be lower than the drain outlet of the unit.
•
Be sure to run the water hose sloping downward and let the water
to flow out smoothly.
•
NOTE: When the continuous drain feature is not being used, remove
the drain hose from the outlet and attach the rubber plug back to
the drain outlet.
EMPTYING YOUR DEHUMIDIFIER
Page 14
Remove
cover
Drain
hose