21
Decalcification must be done correctly to prevent damage. It is essential to follow these
instructions.
Important:
Never clean the machine with vinegar. This causes damage and makes your coffee taste
terrible.
Damage caused by incorrect decalcification or failure to decalcify is not covered by the
guarantee.
Caution: beware of hot water!
1. Recommendations: purchase commercially available decalcifier (decalcifying liquid), diluted
accordi
ng to the manufacturer‘s instructions; pour the mixture in the water reservoir.
2. Make sure there is no capsule inside the machine.
3. Place a large bowl under the dispenser spout to collect the diluted liquid solution and lime
residues.
4. Fill the water reservoir with water to
maximum level mark, mixed with the
decalcifying solution. Make sure that the
solution is dissolved completely.
5. Turn the main switch OFF.
6. Press the Short Espresso button and hold
it pressed down.
7. Turn the main switch ON simultaneously
8. Release the Short Espresso button once
two (2) beeps are heard.
9. The indication light is red.
10. Press the Short Espresso button to start the pump.
11. The machine will run out two (2) tanks of water during the decalcification process.
12. After running out the 1
st
tank of water, one (1) beep will be heard in order to remind you to
fill the water reservoir with the decalcifying solution again. Ensure that it is done to the
maximum water level marking.
13. Once filled, press the button again and the machine will continue the procedure
automatically.
14. The red light will turn blue once the cycle is finished.
15. Repeat the process to rinse the internal circuit with two (2) tanks of fresh water (without the
decalcifying solution) in order to clean the internal circuit completely.
16. Turn the main switch OFF.
17. The decalcifying process is now completed.
