Russell Hobbs RHCM47, Instructions And Warranty

Page: 13 / 21

13

Once you release the button you will hear three beeps. This quantity is now saved under
the corresponding function.
Cappuccino and Latte Macchiato

Fill water tank

Fill milk tank if necessary

If necessary, fold out the milk nozzle (8) using the lever (7)

Place a suitable cup below the coffee outlet (14) and the milk nozzle.

Select the function that is to be programmed. Press the appropriate button (a beep sounds)
and keep it held down (another beep sounds).

Milk froth will be released. Release the button when the desired amount of milk froth has
passed through.

Press and hold the function button once again

This time the coffee brewing process will take place.

Release the button when the desired amount of coffee has passed through.

You will hear 3 beeps; this indicates that the function has been programmed.
Now both the quantity of milk and the quantity of espresso are saved under the appropriate
function.
Setting the Milk Froth Quantity
On the milk tank cover (6) there is a dial (5) which can be used to set whether more milk froth or
more hot milk should be added to the coffee.
For more milk froth: Turn the dial to the top right. For more hot milk: Turn the dial to the bottom left.
Reset to Factory Settings
If the amount of espresso and amount of milk are to be reset to the amounts preset in the factory,
proceed as follows:

Switch off the machine via the power button (16).

Press the espresso button (24) and the double espresso button(17) simultaneously and
keep them held down.