12
Press the power button (16) to switch on the machine and preheat the water. The control
panel flashes during the heating process.
Place a suitable cup below the milk nozzle.
As soon as the machine has heated up, the control panel stops flashing. Press the milk
froth button (21).
A beep sounds, the brewing process starts and the chosen button flashes. At the end of the
brewing process, a beep sounds, the control panel is fully lit up again and the machine
automatically switches to stand-by mode.
The perfect amount of milk to suit your own taste can be programed in the machine
The machine automatically switches off after 30min of being unused. Press the power button to
switch the machine on again.
If the brewing process is to be aborted prematurely, press the chosen button again. You will hear
a beep, and the control panel is fully lit up again. The machine is now in stand-by mode.
PROGRAMING QUANTITIES
Both the quantity of espresso and the quantity of milk can be programed for each function. This
allows you to set the perfect quantity of espresso and milk to suit your own taste.
The set quantities are saved until a new quantity is set.
Espresso, Double Espresso, Milk Froth
Fill water tank
Fill milk tank if necessary
If necessary, fold out the milk nozzle (8) using the lever (7)
Place a suitable cup below the coffee outlet (14) or the milk nozzle.
Select the function that is to be programed. Press the appropriate button (a beep sounds)
and keep it held down (another beep sounds).
The machine starts to prepare espresso or make milk froth.
Only let go of the button once the quantity of milk or espresso that you want has passed
through.
