15
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable. Do not open or change any
parts by yourself. Please refer to a qualified electrical service department or return to the supplier
if servicing is necessary. Always remember to unplug the unit from the electrical outlet when not in
use and before
cleaning. Ensure that the power button is set to OFF “0”.
CLEANING THE MILK FROTHING CONTAINER AND FROTHING TUBE
Even though you can store the milk frothing container with left over milk in the refrigerator, it is
important to clean the container and the frothing tube regularly to avoid clogging and build-up of
residues. In order to clean the milk frothing container, please follow the instructions listed below:
1. Remove the milk frothing container from the coffee maker.
2. Remove the lid of the container.
3. Discard any left-over milk, rinse and wash the milk frothing container and its lid thoroughly with
warm soapy water. Do not use abrasive cleaners and scouring pads, as they will scratch the
finish. The milk frothing container is also dishwasher safe (top rack). Do not place the lid of
the milk frothing container in the dishwasher.
4. Rinse and dry well.
5. Now place a large empty cup underneath the frothing tube.
6. Press and hold the Latte/ Clean button for 3 seconds and then release it. The coffee maker will
start releasing steam through the frothing tube -
let it run for a few seconds until you don’t see
any milk in the cup.
7. When done, press the Latte/ Clean button once to stop the process.
8. Dispose any water leftover in the milk frothing container and place it back onto the unit.
CLEANING THE BREW HEAD, THE PORTA-FILTER AND FILTER
1. Switch the power button on the side of the coffee maker to the OFF
position “0” and unplug the
power cord from the electrical outlet.
2. Some of the metal parts may still be hot. Do not touch them with your hands until they have
cooled.
