8
After making a jug hot water, you must turn the transition
knob to
“OFF” position. The preheating process is finished.
MAKE ESPRESSO COFFEE:
Remove the funnel by turning it in clockwise, add ground
coffee to steel mesh with measuring spoon, a spoon of
ground coffee power can make one cup of coffee, then press
the ground coffee powder tightly with the tamper.
Set the steel mesh into metal filter, then place them upwards into the snap and
you can fix them into coffee maker firmly, turn it anticlockwise until it is on the
lock position.
Pour out the hot water in the jug. Place espresso jug on removable shelf. Make
sure that the transition knob is at the OFF position.
At the time, the yellow indicator will go out, you can turn the transition knob to
now and the yellow light will illuminate again, the coffee will start to drip down
after a few seconds. When the jug is filled with coffee, you must turn the
transition knob to
“OFF” position.
NOTE:
during operating, do not touch the warming jug facility. When moving the
appliance, never carry the handle on the warming jug. The handle is ONLY to
prevent the warming jug from slipping.
If you want to make more coffee, wait for a moment, once the yellow indicator is
extinguished, turn the transition to
position and make coffee. You should
press down
/
button manually when desired coffee is obtained or the colour
of coffee changes, the yellow and green indicator will switch off and the coffee
maker will stop working, at any time, make sure to turn transition knob to the OFF
position, your coffee is ready now!
WARNING:
Do not leave the coffee maker unattended while making coffee, as
you may need to operate the machine manually at times!
After making the coffee, you can take the metal funnel out by turning it clockwise,
and then pour the coffee residue out with the steel mesh by pressing the press
bar.
Let the machine cool down completely, before rinsing the parts under running
water.
GENERATE STEAM/ MAKE CAPPUCCINO:
F
Fig
