OPERATING INSTRUCTIONS
1.
The heater must be placed on a flat level surface.
2.
When heater is plugged in the power switch is turned on, there will be a “beep” and a
red power light to indicate that the power is on. The red light will remain lit until the
power switch is off or the heater is unplugged from the outlet.
3.
Press the POWER/MODE BUTTON to start the heater.
4.
When turning the heater on, the unit will be in the LOW heat mode (1100 watts), the
FAN will start to run, the”
” in the LCD will be highlighted. At the same time the “L”
in the LCD will be highlighted. The decoration light will be lit from 1 and will move to
6 gradually.
5.
When POWER/MODE button is pressed at this point, the heater will be set into
“HIGH “heat mode (2000 watts), and the “H” in the LCD will be highlighted. The
decoration light will be lit from 1 and will move to 6 gradually.
6.
Pressing the POWER/MODE button once more will set the heater into AUTO mode
(2000 watts). Note that the display now displays a SET TEMP indicator (see
THERMOSTAT INSTRUCTION). At the same time the “A” in the LCD will be
highlighted.
7.
Press the POWER/MODE button again and the heater will be in the FAN mode (25
watts). The “F” in the LCD will be highlighted. FAN mode is for fan-only operation.
8.
Pressing the POWER/MODE button again and the heater will go back to LOW heat
mode. Continuing to press the POWER/MODE button will cycle the heater through
LOW, HIGH, AUTO, FAN mode.
9.
Press OSC. button, the heater will oscillate left and right. Press it again and the
oscillation will stop.
10.
To disconnect heater, press POWER/MODE button for about 4 seconds, and turn off
the power switch, then remove plug from outlet.
TIMER FUNCTION
Press the Timer button and the light comes on indicating 1 hour of time. Press it again
and the light indicates 2 hours. Press it a third time and it indicates 3 hours. The total
time that can be indicated is 8 hours. Continuing to press the Timer button will cycle
through the settings until all timer lights are off. When the time indicator lights are off, the
heater will run continuously.
5
