background image

Congratulations on purchasing our Russell Hobbs Ceramic Upright Heater. Each unit is 

manufactured to ensure safety and reliability. Before using this heater for the first time, 

please read the instruction manual carefully and keep it for future reference. 

 

PART NAME : FRONT AND BACK 

 

      

                        

 

 

FEATURES OF THE RUSSELL HOBBS CERAMIC UPRIGHT HEATER 

  The Russell Hobbs Ceramic Upright Heater has an 45° oscillation function which 

allows it to heat more of the room. 

  Safety PTC heating element. 

  Timer function allowing up to 8 hours. 

  Two heat settings on the heater mean that you can set the heater to LOW (1100W) 

or HIGH (2000W). 

  The variable thermostat knob allows you to control the output of the heater, 

according to the ambient temperature and size of the room being heated. 

  The power on indicator light will show when the heater is in use. 

  LCD Display for mode indicator, temperature indicator and set time indicator  

  The over-heat protection switch will automatically switch off the heater in a case of 

overheating and switch it on again when the heater cools down sufficiently. 

  Remote control for ease of use (batteries not supplied). 

 

2

  Safety tip over safety switch. 

Summary of Contents for RHC1960










Reviews: