Before Use
Before using your Blender for the first time wash the jug, lid and cap in warm
soapy water, rinse well and dry. NOTE: The blades are sharp-edged, handle
with care.
Preparation
1. Position the motor unit on a dry, firm, level surface, close to a power
socket and out of reach of children.
2. Check that the control knob is set to OFF.
3. Insert the blade assembly into the base of the glass jar, and rotate it anti-
clockwise until it is locked.
4. Place the glass jar assembly on top of the base/motor of the blender.
Ensure that the jug is firmly in place by turning it in a clockwise direction to
lock it. There are ‘Lock’ and ‘Unlock’ markings on the unit. It is
recommended that you place the jug handle away from the controls
situated at the front of the blender.
5. Plug the motor unit into the power socket
6. Put the ingredients into the jug. Do not fill it past the 1500 ml mark. If you
do, the contents may force the lid off when you start the motor.
Fitting the Lid
1. Always fit the lid to the jug before using it.
2. Press well on the lid until the flanges of embedding are well fixed in the
jug.
3. Put the cap into the hole in the lid and press it down to fit properly.
4. It is not a good idea to run the blender without the cap, especially if only
solid ingredients are used. They may be ejected through the hole when
they hit the blades.
The Switch
Turn the control knob clockwise to the speed you require.
