Russell Hobbs RH3VTD800, Instruction Manual

Page: 14 / 32

Note: This dryer is not suitable to be directly placed on top of a washing
machine.
Note: The dryer hanging brackets have to be installed into timber studs or
timber slats. Do not install into plasterboard.
Tools Required: Philip head screwdriver, drill and 3mm drill bit.
For your own safety, a minimum of 2 people should lift or hold this product.
Wall Mounting
1. Locate the wall mount kit, this will be packaged with the IB inside the
drum of the appliance
2. Determine the position on wall that you want the dryer to be situated.
Mark the required bracket position.
i. A minimum 50mm is needed between the top of the dryer and
the ceiling for ease of installation.
ii. If mounting above a washing machine, allow sufficient room to
open the lid of the washer (if needed)
14
Wall Installation
25mm screws
2 x Hanging bracket
2 x Spacers
4 x 12mm Screws
6 x 25mm Screws