4
19.
Keep the appliance and cord away from direct radiant heat from the sun, damp
areas, sharp edges and other dangers.
20. Do not put the motor unit in water or any other liquid; do not use it in a bathroom or near
any source of water.
21. When handling the blade attachment, always hold it by the shaft.
22. Do not attempt to sharpen the blades.
23. Do not use the appliance if blade attachment is bent or damaged.
24.
Use of an extension cord with this appliance is not recommended. However, if it is
necessary to use an extension cord, ensure that the cord is suited to the power
consumption of the appliance to avoid overheating of the extension cord, appliance
or plug point. Do not place the extension cord in a position where it can be pulled on
by children or animals or tripped over.
25.
This appliance is not suitable for outdoor use. Do not use this appliance for anything
other than its intended use.
26.
DO NOT carry the appliance by the power cord.
27.
Do not leave this appliance unattended during use. Always unplug the unit when not
in use or before cleaning.
28.
Always operate the appliance on a smooth, even, stable surface. Do not place the
unit on a hot surface.
29.
Do not operate this appliance by means of an external timer or remote-control
system.
30. Do not put any other object (spoon, spatula, etc.) into the bottle while the blender
is plugged in.
31. Switch off the appliance and disconnect from the power supply before
changing accessories.
32.
Never use this appliance to blend anything other than foods.
33.
Do not use during cooking processes or with boiling liquids.
34.
Do not operate the appliance with no ingredients and do not remove the lid when the
blades have not come to a complete stop.
35.
The blades are very sharp. Take care when handling the sharp cutting blades,
emptying the bottle and during cleaning.
36.
Only use the accessories supplied with the appliance.
37.
Do not operate the vacuum head for over 30 minutes, please use DC5V adapters.
38. The blender is equipped with a powerful motor and therefore processes very
quickly. Due to its efficiency, there is no need to run the motor for more than
one minute per session.
39.
Don’t operate vacuum head below minus ten degrees.
