BEFORE FIRST USE
•
After unpacking the appliance, wash everything except the motor unit with warm
soapy water. Dry thoroughly. Wipe the motor unit with a damp cloth or sponge.
DO NOT IMMERSE THE MOTOR UNIT IN WATER. Care should be taken when
handling the cutting wheel, as it is very sharp.
•
All parts of the appliance are to be thoroughly cleaned before being used for the first
time (refer to ‘Cleaning’).
PRODUCT ASSEMBLY
•
Place the motor unit on a flat surface.
•
Place the juice bowl on top of the motor unit. The juice spout should be on the left side.
•
Install the fine mesh strainer basket into the juice bowl.
•
Place the cutting wheel in the centre of the strainer basket.
•
Use the key to tighten and secure the cutting wheel.
•
Place the cover on top of the juice bowl.
•
Push the locking bar into position to lock the unit.
•
Place the pulp collector under the cover. Push the bottom thimble of the pulp collector
into the limit hole.
•
Place the juice cup below the juice spout. You may start to grind and extract fresh juice.
•
Use the plunger while grinding fruits, vegetables, grains and nuts.
