5
5. The light will come on, and the kettle will heat up.
When the water boils the kettle will switch off and the light will go out. To switch off
manually, move the switch to
O
, or simply lift the kettle off the stand.
GENERAL
When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the
steam used to switch off automatically, which then condenses and escapes via vents
under the kettle.
You may see some discolouration on the floor of the kettle. Again, don’t worry – it’s due
to the bonding of the element to the kettle floor.
BOIL DRY PROTECTION
This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
You must then remove the kettle from its stand to reset the cut-out.
Sit the kettle on the work surface till it’s cold.
CARE AND MAINTENANCE
•
Unplug the stand, and let the kettle cool before cleaning.
•
Wipe all surfaces with a clean damp cloth.
THE FUNNEL
1. Open the lid.
2. Put your thumbs inside the funnel.
3. Gently press one thumb against either side of the funnel, and lift it out of the kettle.
DISPOSAL
The appliance contains a battery, which must be removed from the appliance, and
recycled, or disposed of in an environmentally friendly way.
Put the end of a screwdriver in the notch above the Memo, and prise it out of the lid.
Your local authority will have arrangements for recycling or disposing of the BRITA®
Memo.
FURTHER INFORMATION
You can find more information about BRITA® filter cartridges and the BRITA® Memo in
the BRITA® Information Guide supplied with the kettle.
