4
17 Don’t use the opener for any purpose other than those
described in these instructions.
18 Don’t use the opener if it’s damaged or malfunctions.
19 If the cable is damaged, return the can opener, to avoid
hazard.
household use only
fit the handle
1 Hold the handle vertically, with the pivot, cutter and
magnet at the bottom.
2 Put the pivot into the big hole, and move the handle to
your left, to push the pivot into the small hole.
3 Rotate the handle ninety degrees clockwise, so it rests on
the top of the body.
positioning
4 Sit the can opener on a stable, level surface, near a power
socket.
5 Pull the cable fully out of the cable storage area in the back
of the body and plug it into the power socket (switch the
socket on, if it’s switchable).
opening cans
warning
Don’t try to open aluminium cans, aerosol cans,
pressurised cans, or cans of flammable materials.
6 Wipe the top of the can clean before starting to open it.
7 Rotate the handle ninety degrees anti-clockwise, till it’s
vertical.
8 Hold the can with its lip on top of the drive gear and its
side against the guide.
9 Rotate the handle clockwise till the can is held firmly
between the cutter and the drive gear.
,
Don’t start to open a can near a seam or a corner – it may
jam.
Summary of Contents for 14448
Page 1: ...instructions...
Page 2: ...2...
