Ruskin RRS ROOFTOP YCD/TCD, Installation Instructions Manual

Page: 6 / 8

R11-10TDW
ERV UNIT SCHE MATIC DIAGRAM
COM PO NENT CODE
A131 Fixed Re lay Board
B26 Mo tor, Ex haust Air
B27 Mo tor, Fresh Air
B28 Mo tor, Des ic cant Wheel
B30 Motor, Damper (Op tional)
C23 Capacitor, Wheel Motor
C25 Ca paci tor, Mo tor Ex haust Air
C26 Ca paci tor, Mo tor Fresh Air
DL43 De lay, Cy cle Timer (Op tional)
F29 Fuse
J33 Jack, Cy cle Control (Op tional)
J34 Jack, Cy cle Con trol Harness (Op tional)
J40 Jack, Cy cle (Op tional)
J48 Jack, Con trol Box (Fresh Air)
J50 Jack, Con trol Box (Wheel)
J51 Jack, Con trol Box (Ex haust Air)
J56 Jack, Con trol Box (Damper)
J148 Jack, Fresh Air Mo tor Harness
J150 Jack, Wheel Mo tor Harness
J151 Jack, Exhaust Air Mo tor Harness
J152 Jack, Trans former (High Volt age)
J153 Jack, Field Harness
J160 Jack, Damper Mo tor Harness
K94 Re lay, On/Off (Op tional)
K163 Re lay, Ex haust Air Motor
K164 Re lay, Fresh Air Motor
P33 Plug, Cy cle Control (Op tional)
P34 Plug, Cy cle Con trol Harness (Op tional)
P40 Plug, Wheel Cycle (Op tional)
P48 Plug, Fresh Air Mo tor Harness
P50 Plug, Wheel Mo tor Harness
P51 Plug, Ex haust Air Mo tor Harness
P56 Plug, Damper Mo tor Harness
P148 Plug, Fresh Air Motor
P150 Plug, Wheel Mo tor
P151 Plug, Exhaust Air Motor
P152 Plug, Trans former (High Volt age)
P153 Plug, Field Harness
P160 Plug, Damper Motor
S23 Ther mo stat - Low Am bi ent (Op tional)
S26 Switch, Low Am bi ent (Op tional)
S51 Switch, Door
S125 Switch, Am bi ent Override (Op tional)
T27 Trans former, Control
T28 Trans former, Step- down (Op tional)
T47 Trans former, Step- down (Op tional)
TB57 Terminal Block - High Voltage
WIRE COLOR
BK Black
BL Blue
GR Green
GY Gray
OR Orange
Notes:
1. Remove jumper to install field optional low ambient switch.
2. Step-down transformer assembly for 460/575 volt units.
3. Selective voltage terminal for proper unit voltage
4. Optional low ambient switch.
5. Optional motorized intake damper.
6. Unit may be wired for HI, MED, or LO speeds. Diagram shows the HI speed setup, to rewire for MED or LO speed, disconnect
BK-101 from relays and connect BL-101 for MED, or RD-101 for LO. Also connect WH-101 to BK-101.
7. Optional stop, start and jog control.
8. Matching adapter harness (provided) to connect with rooftop unit. For energy management systems c24v to green
and common 24v to black.
PAGE 6