Ruskin AMS810 Installation And Operation Instructions Download Page 1

Page: 1 / 4

www.ruskin.com • 3900 Dr. Greaves Rd. • Kansas City, MO 64030 • (816) 761-7476

INSTALLATION AND OPERATION INSTRUCTIONS

MODEL AMS810 TRANSDUCER

MOUNTING

ALL STATED SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION.

II-AMS810-918/

Replaces II-AMS810/914

AMS810 Display Unit Open

AMS810 with Display

Mounting Hole Pattern

Mounting Screws Location

Mount the unit to its mounting surface with four #10 screws through the holes in the mounting feet. The preferred mounting orientation is with the

pressure ports facing down.

TOOLS & MATERIAL LIST

SCREWDRIVER

#10 SCREWS

SEALANT FILLED CONNECTORS

DRILL WITH 5/32” BIT

WIRE

PRODUCT IDENTIFICATION

Summary of Contents for AMS810

Page 1: ...tember 2018 II AMS810 918 Replaces II AMS810 914 AMS810 Display Unit Open AMS810 with Display Mounting Hole Pattern Mounting Screws Location Mount the unit to its mounting surface with four 10 screws...

Page 2: ...ignal and the white wire while unused must be insulated from accidental contact with ground or any other potential For 4 to 20 mA signaling only direct current can be used to power the AMS810 0 to 5 V...

Page 3: ...for factory use leave in the off posiiton TROUBLESHOOTING PROBLEMS POSSIBLE SOLUTIONS LED does not light Check power connections for proper power LED is blinking fast The unit may be performing an aut...

Page 4: ...5x VDC 4 20 mA 0063x mA 025 0156x mA 0625 0312x mA 125 0468 mA 1875 0625x mA 25 1563x mA 625 Table 1 Scale Formulas SCALE FORMULAS SOLD TO RUSKIN CUSTOMER CONTROL NO 123456 TAG AHU 1 MODEL AMS050 Ka 3...