Communications Interface
The PTX Model 3 PRO responds to
commands and inquiries using VISCA
over IP communications protocol. This
protocol is available through many
hardware and software joystick
controllers. Here is a list of the
supported commands.
PAN TILT DRIVE
Up
Down
Left
Right
Upleft
Upright
Downleft
Downright
Stop
Absolute Position
Home
Reset
PAN TILT
Ramp Curve*
Pan Tilt Limit*
PRESET
Reset
Set
Recall
Preset Drive Speed
TALLY
On/Off
SYSTEM
Pan Reverse
Tilt Reverse
COMMANDS
PAN TILT
Position
Ramp Curve
Pan Tilt Limit
PRESET
Preset drive speed
Preset
TALLY
On/Off
SYSTEM
Pan Reverse
Tilt Reverse
POWER STATUS
On/Off
SW VERSION
Vendor ID
Model Code
ROM Version
Socket Number
COMMAND INQUIRIES
PTX Model 3 PRO VISCA over IP is also
integrated in the PTZ/PTX camera
control software in RUSHWORKS VDESK™
Integrated Robotics Production Systems,
as well as the RUSHCONTROL™ camera
control software application (Windows).
*not functional in the initial release
