Take the supplied Velcro cable ties and clean up the
wiring bundle to reduce the probability of snags. Make
sure there is sufficient slack for the assembly to tilt
back and forth on the PTX head.
Use one of the supplied MiniDIN1.0/2.3 to BNC
cables to connect the
SDI Out
of the MicroStudio
4K camera to the
SDI Out
connector on the PTX
arm.
Locate the DC power cable included with the PTX. This cable has
a locking DC plug on one end and a non-locking plug on the other.
The locking DC plug connects to the
DC to CAM
port on the PTX.
Insert it fully and tighten the locking ring to secure the connection.
Insert the non-locking plug into the socket on the BABYZOOMER
DC splitter cable.
This will feed video out of the camera to the
SDI
Out
connector on the base of the PTX for easy
cable management.
