Rush STROBE 1 5x5, User Manual

Page: 20 / 44

RUSH STROBE 1 5x5 user manual 20
DMX channel modes
The fixture provides three control modes enabling varying degrees of DMX
control and enabling the efficient use of DMX channel bandwidth. Each of
these modes is documented in detail in DMX protocol on page 27 and they are
summarized briefly here:
DMX channel
mode
Description
4 channels Sound-activated stand-alone, line, number or letter effects,
full range dimming and strobe effects.
25 channels Dimming control of individual LED pixels.
29 channels Dimming control of individual LED pixels. Sound-activated
stand-alone, line, number or letter effects, full range
dimming and strobe effects.
To set the fixture’s DMX channel mode:
1. Select and press the ENTER button.
2. Use the DOWN and UP buttons to select the , , or
DMX channel mode.
3. Once the mode has been selected, press the ENTER button to set it (or, to
return to a higher level of the menu structure without any change press the
MENU button).
Show mode (auto trig)
In the absence of a DMX control signal, show mode provides standalone pre-
programmed light shows. Show mode can be combined with sound activation
to provide a music-synchronized light show.
To set a fixture’s show mode:
1. Select and press the ENTER button.
2. Use the DOWN and UP buttons to select show 0~8. Shows 1-8 are pre-
programmed shows. Show 0 executes a random show.