Ruris TE400, Manual, Page: 24 / 52

6
You are responsible for safety in the work area.
Keep the machine clean to work easier and safer.
Wear specific work clothes such as goggles. Do not wear sliding or high-heeled footwear.
Never use the machine if you are wearing sandals or barefoot.
When working, keep a stable and secure position. To avoid stumbling, do not turn your
back. When working, keep the machine at an appropriate distance from your body.
Always turn off the machine, wait for the engine to stop and remove the power cord during
breaks or when you change location.
Do not leave the machine unattended, and during breaks turn off the machine and
disconnect it from the power source.
Do not distract people working with the machine, this can lead to loss of control over the
machine and accidents.
Do not use the machine in rain, fog or wetlands.
Use the machine only in daylight or in optimal conditions of artificial light.
Do not use the timer if the on / off switch is defective. An electrical machine with a faulty
switch can be dangerous and must be changed to a specialized service.
The variation of the supply voltage must correspond to the information engraved on the
machine.
Unplug the cable only by pulling the plug. Protect the oil cable, heat and sharp edges.
Damaged cables can cause electric shocks.
Make sure the machine is turned off before connecting it to a power source.
Use only approved extensions when working outside. If you use a cable drum, open it
completely to avoid heating the cable. Cable with minimum section 1.5 mm
2
.
When working outside, the power outlet must be equipped with a safety switch.