Ruris RX 400S, Manual

Page: 117 / 224

EN
18
As you hold the bottom
handle, lift the back section
of the lawn Grass catcher as
seen in the adjacent figure.
The cut lawn will fall. When
attaching the lawn Grass
catcher, make sure that the
lawn bag is on the canopy
rod, between the right and
left side of the console.
Height handle adjustments
The machine provides you with several positions for the handle and is sent with it in the
middle position. To adjust the height proceed as follows:
⚫
Remove the starting string from the guide location.
⚫
Remove the end of the nut from the square screw.
⚫
Move the bottom handle around the rear canopy to adjust the height.
Attach the bottom handle with nuts and washers to the square screws.
Clutch
Grasp the clutch lever by the guidance system. Release the clutch lever to turn off the
steering system. Release the clutch lever when you want to slow down or when an
obstacle approaches, turn around or stop.
Hooks
Drowned screw
Flat washer
Grower washer
Butterfly nut