Ruris RX 400S, Manual, Page: 119 / 224

EN
20
When the control lever is maneuvered towards the frog symbol, the engine
speed decreases.
ATTENTION!
Only apply the lever when the engine is running. Actuation of the lever without starting
the engine can damage the drive mechanism.
To slow down, push the lever forward.
To increase the travel speed, pull the lever back.
The travel speed will match depending on the working conditions (land and lawn).
HEIGHTING THE CUTTING HEIGHT
NOTE: Your machine is sent with the cutting height to the lower position. Adjust the
cutting height as follows.
Lever Height adjustment is located above the right rear wheel. To adjust the cutting
height, drive the lever outwards and maneuver it forward or backward by step.
NOTE: For uneven or unstable terrain, move the cutting height to a higher position.
small
big