![RUPTELA FLS Eco Quick Start Manual Download Page 9](http://html.mh-extra.com/html/ruptela/fls-eco/fls-eco_quick-start-manual_1500421009.webp)
www.ruptela.com
[email protected] | +370 5 2045030
9
Installation
Fill a vessel with enough fuel to submerge the probe in.
Submerge the probe fully into the vessel.
Take out the probe, holding the FLS as shown in the picture below.
Let fuel drip out for 15 seconds.
Go to the
Calibration
section. (1)
Go to the
Dry calibration
section. (2)
While holding the probe, click the
Calibrate
button. (3)
Make sure the probe is not touching anything!
Once calibration is complete, the sensor can be installed.
Hold for 15 s