14
Runzel FOR-900 Utmärkt
Page of 34
14
• 9) “Steam ready” indicator light
• 10) ON-OFF boiler switch.
• 11) ON-OFF iron switch.
• 12) Iron rest
• 13) Funnel (if provided)
• 14) Bottle for water-filling (if provided)
• 15) Teflon bottom (if provided)
• 16) Rest mat
INSTRUCTIONS FOR USE
• Before steam ironing, make sure the fabric is suitable for this
type of ironing. The appliance works with normal tap water. If
the water has a high calcium content, you are recommended
to use distilled water.
FILLING THE BOILER AND PLUGGING INTO THE MAINS
• Before filling the tank, make sure the appliance is unplugged from
the mains. Remove the boiler cap (5) and fill the tank with water.
This appliance is fitted with a special safety cap. To unscrew, press
downwards and at the same time rotate anticlockwise. Replace
the cap securely by pressing down and rotating it clockwise until it
stops. Put the iron down flat on its rest and plug in.
• Important: Never unscrew the cap (5) when the boiler is under
pressure.
TURNING ON
• Press both switches (10 and 11) and they will light up to
indicate that the boiler and iron are now on.
• NB: when using the appliance for the first time, a smell may
be given off due to heating and consequent drying of the
sealants used when assembling the boiler and iron.
OPERATION
• Select the required temperature by rotating the thermostat
knob (3) to one of the segments (tab.
• A “Regulation iron’s temperature”) (divide garments according
to the required ironing temperature, starting with those which
require the coolest temperature) according to the type of
fabric to be ironed . Wait for the “steam ready” light (9) to
come on and the “iron hot” light (4) to go out before you sart
to iron. When the warning light (9) doesn’t switch on, please
wait 10 minutes till the boiler is full, before ironing.
• NB: both lights will come on and go off during ironing according
to the temperature reached by the boiler and iron. To generate
steam, simply press the steam button (2). You can vary the
quantity of the steam by using the steam regulator knob (4).
CONTINUOUS STEAM BUTTON
• Some models have a “continuous steam” delivery button. This
function is obtained by pressing the “continuous steam” delivery
button (9) and moving the slide backwards so as to lock the button.
• To interrupt steam output, simply move the slide back to the
original position.
