Runtastic GPS Watch with Heart Rate Measurement, Operating Instructions Manual

Page: 55 / 74

55
Waypoint-radius
This setting determines the distance from the actual marked
waypoint at which the watch determines that you have reached the
waypoint. The default is 100 feet but it can be changed manually
(from 50 to 650 feet).
To set the waypoint radius:

Press and hold the MODE button to enter the watch's menu.

Select NAVIGATION from the menu

WP Radius

Use the ST/STOP or Lap/RESET buttons to increase or reduce
the radius of the waypoint goal.

Press the MODE button to accept the setting and return to the
previous menu.
Once you reach the radius of a waypoint, you can hear 3 short
“beep”-sounds. The beeps can be turned off by:
•
Press and hold the MODE button to enter the watch menu.
•
Select GPS from the menu

ON/OFF
•
Press the VIEW button and the message "GPS On!" will be
displayed.
8.6 Starting the GPS Navigation
To start GPS navigation:
While standing in one place:
Option 1:
•
Change to GPS Workout or GPS Navigation mode.
•
Press and hold down the „VIEW“-button from GPS-
Workout-mode.
Option 2:
•
Press and hold the MODE button to enter the watch menu.
•
Select GPS from the menu

ON/OFF