V1.1
Rungu Rear Rack owner’s manual –
Use with non-electric and mid-drive electric Rungu
Copyright 2017 Standard Bearer Machines, LLC
Page
7
of
18
Installation and removal instructions
Tools required
5mm hex wrench
4mm hex wrench
Left and Right Side mounting arm installation
To install the mounting arms, keep the trike upright on a level floor. Remove the quick release skewer
from the rear hub.
On the right side of the frame, use the 4mm hex wrench to install the right side mounting arm as
depicted below. Arrange the orientation of the mount so that the slot fits over the axle of the hub.
(Derailleur and wheel images have been omitted for clarity)
