Runco VX VIDEO XTREME VX-33D Installation & Operation Manual Download Page 38

Page: 38 / 94

Installation

Runco VX-33d Installation/Operation Manual

PRE

IMINAR

Other

Considerations

Other considerations and tips that can help improve your installation:

• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector

away from heating and/or air conditioning vents. Changes in temperature may cause
drifts in the projector circuitry, which may affect performance.

• Keep the projector away from devices that radiate electromagnetic energy such as

motors and transformers. Common sources of these include slide projectors,
speakers, power amplifiers and elevators.

3.4
Installing the Primary
Projection Lens

The projection lens is shipped separately from the projector. To install it, proceed as
follows:

Loosen the captive Phillips screw at the
top of the Projector Front Jewelry.

Remove the jewelry.

➤

Summary of Contents for VX VIDEO XTREME VX-33D































































































Search results

Summary of Contents for VX VIDEO XTREME VX-33D

Reviews:

Related manuals for VX VIDEO XTREME VX-33D

Brands by name

Popular brands

Runco VX VIDEO XTREME VX-33D, Installation & Operation Manual

Search results

Summary of Contents for VX VIDEO XTREME VX-33D

Reviews:

Related manuals for VX VIDEO XTREME VX-33D

Brands by name

Popular brands