manualshive.com logo in svg

Runco VX VIDEO XTREME VX-33D, Installation & Operation Manual

Share
Download
Runco VX VIDEO XTREME VX-33D Installation & Operation Manual Download Page 31

Runco VX-33d Installation/Operation Manual

15 

PRE

L

IMINAR

Y

3.1 
Remote Control

To install batteries in the remote control, 
press up on the battery cover retainer clip 
and lift off the cover. Install the two AAA 
batteries with the correct polarity and then 
replace the cover. 

Notes on Batteries

• Make sure that the battery polarities are correct when installing the batteries.

• Do not mix an old battery with a new one or different types of batteries.

• If you will not use the remote control for a long time, remove the batteries to avoid 

damage from battery leakage.

Notes on Remote Control 
Operation

• Make sure that there is nothing obstructing the infrared beam between the remote 

control and the IR receiver on the projector.

• If the effective range of the remote control decreases, or it stops working, replace the 

batteries with new ones.

• The remote control may fail to operate if the infrared remote sensor is exposed to bright 

sunlight or fluorescent lighting.

• Ambient conditions may possibly impede the operation of the remote control. If this 

happens, point the remote control at the projector, and repeat the operation.

3. Installation

Summary of Contents for VX VIDEO XTREME VX-33D































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands