Runco Signature Cinema SC-1, Owner'S Operating Manual

Page: 83 / 126

Operation
Runco SC-1 Owner’s Operating Manual 71
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all projector functions.
(The Calibration and Service menus are hidden and not accessible until you enter a
passcode.)
Input Source From the Main Menu, select Input Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, Composite is the
active source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press
ENTER . Select the appropriate aspect ratio for your
screen size and the type of program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a “
7
” to its left; in this example,
Anamorphic is selected.
Runco Video
Input S ource
A s pect Ratio
Picture
Input Po s ition
I S F Pre s et s
Information
Calibration
S ervice
Input S ource
> Compo s ite
S -Video 1
S -Video 2
Component S D
HD/R G B 1
HD/R G B 2
HDMI 1
HDMI 2
A s pect Ratio
7
Anamorphic
S tandard 4:3
Letterbox
VirtualWide
Cinema
Virtual Cinema
The aspect ratio selection is automatically saved for each input and
resolution.
Note