Runco Reflection CL-810 CineWide, Owner'S Operating Manual

Page: 45 / 58

45
Runco CL-810 Owner’s Operating Manual
➤
ICC Adjust
➤
Store Settings
➤
Splash Screen Timer
ICC Adjust
Color NTSC
R G B Y C M
Intensity
+100
Sat. +100
Hue M C 0
Store Setting
Store Settings
Memory 1
ISF Night
ISF Day
Splash Screen Timer
+20 +
CALIBRATED FOR:
CUSTOM BUILT BY:
ISF Enable
> Off
On
Use the ICC Adjust controls to customize the stored NTSC,
HDTV and/or PAL color space characteristics. To do this,
select the color space to modify. Then, select a component
color (Red, Green, Blue, Yellow, Cyan or Magenta).
For each component color, you can adjust the following:
Intensity: This slidebar adjusts the intensity -- also known
as luminance -- of a given color.
Sat.: This slidebar adjusts the color saturation level -- the
amount of that color in a video image. Lower settings
produce less saturated colors; a setting of “0” removes that
color from the image entirely. If the saturation is too high, that color will be overpowering
and unrealistic.
Hue: This slidebar adjusts the red/green color hue for true color reproduction of video
signals. For best results, adjust tint while displaying an external color bars test pattern.
Otherwise, it is recommended that Hue remain at its default setting.
When you have finished customizing the color space, select
Store Setting and press
Enter.
When you have finished calibration, select Store Settings
and choose “Memory 1,” “ISF Night“ or “ISF Day” to store
your settings.
To recall stored custom image quality settings, select
Restore
Image Settings from the Adjustment menu (refer to “Picture
Quality Adjustments,” earlier in this section) and choose
“Memory 1,” “ISF Night“ or “ISF Day.” Or, simply use the
corresponding buttons on the remote control.
Press the
◄
or
►
arrows to set the Splash Screen Timer.
This timer controls how long the startup (ISF and Runco
logo) image stays on-screen after you turn on the projector.
Select from 5 to 60 seconds, in 1-second increments. When
finished, press
Exit .
Use ISF Enable to control the display of the ISF logo on the
CL-810 splash screen upon power-up.
➤
ISF Enable