7
WARNING!
To meet FCC requirements, a shielded power cord is required
in order to prevent interference. It is essential that only the supplied power
cord is to be used. Use only shielded cables to connect I/O devices to this
equipment. You are cautioned that changes or modifications not approved
by the party responsible for compliance could void your authority to operate
the equipment.
WARNING!
The projector cooling fan continues to run for approximately
90 seconds after the projector is turned off using the Power button on the
control panel or remote control. Never unplug the power cable to power off
the projector; damage to the lamp may result.
WARNING!
High brightness light source. Do not stare into the beam of
light, or view directly. Be especially careful and ensure that children do not
stare directly into the beam of light.
WARNING!
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
CAUTION!
For minimal servicing and to maintain high image quality, we
recommend that you use the projector in an environment that is smoke and dust
free. When used in areas where there is a lot of smoke or dust, the filter and
lens should be cleaned often to lengthen the service life of the projector.
WARNING!
Some IC chips in this product include confidential and/or trade
secret property belonging to Texas Instruments. Therefore you may not copy,
modify, adapt, translate, distribute, reverse engineer, reverse assemble or
decompile the contents thereof.
WARNING!
The ventilation slots, lamp, and objects next to them may get
hot during operation. Do not touch these areas until they have sufficiently
cooled down.
CAUTION!
Do not put the exhaust vent near air conditioners or plants.
This projector utilizes a tin-lead solder, UHP Lamp containing a small amount
of mercury. Disposal of these materials may be regulated due to environmental
considerations.
Warnings
Product Disposal
Exhaust Vent
Air Flow
Air Conditioner
or Plants
