Runco Q-750i Series Installation And Operation Manual Download Page 41

Page: 41 / 108

Installation

Q-750i Series Installation/Operation Manual

PRE

IMINAR

To install the fixed CineWide base plate on a Q-750i/CineWide:

Place the projector upside down on a blanket or other soft surface.

Place the CineWide base plate on the bottom of the projector.

If you are mounting the projector on a ceiling:

Line up the three holes on the left

and right mounting rails (included with the projector ceiling mount kit) with those on
the projector and base plate.

Secure the CineWide base plate (and ceiling mounting rails, if needed) to the projector
with the Pan-Head Phillips screws provided with the CineWide lens base plate.

Do not use the mounting screws provided with the ceiling

mounting kit.

Use only the hardware provided with the CineWide

lens base plate.

2. DO NOT OVER-TIGHTEN THE SCREWS.

Caution

Summary of Contents for Q-750i Series













































































































Search results

Summary of Contents for Q-750i Series

Reviews:

Brands by name

Popular brands

Runco Q-750i Series, Installation And Operation Manual

Search results

Summary of Contents for Q-750i Series

Reviews:

Brands by name

Popular brands