Runco CX-40HD, User Manual, Page: 26 / 78

Installation
14 Runco CX-40HD/CX-46HD Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup Table 3-1 gives a quick overview of the Crystal Series LCD installation process. The
sections following this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
Table 3-1. In s tallation Overview
S tep Procedure
For Detail s , refer to
page...
1
Mount the Crystal Series LCD on a wall (optional) 15
2
Connect signal sources to the Crystal Series LCD 16
3
Connect external controller to RS-232 port (optional) 23
4
Apply power to the Crystal Series LCD 25
5
Change the OSD language 25
6
If using the Crystal Series LCD with a PC, adjust PC display
properties 26
7
Display calibration: adjust the following for each input ;
save settings when finished:
• Brightness
• Contrast
• Color level
• Tint
• Position/phase (for RGB sources)
29 through 41
Note