Runco CineWall CW-95DHD, User Manual

Page: 94 / 106

Serial Communications
82 CineWall™ Installer/Integrator Manual
PRE
L
IMINAR
Y
Table 7-1 lists the RS-232 command set. The “Parameter (min/max)” column shows the
valid parameter ranges, or “NA” for commands that take no parameters.
When you enter a valid command, the DHD Controller executes it and acknowledges it
with a plus sign on the command line (+ >). When you enter an invalid command – one
that is misspelled or followed by values outside the valid range for that command – the
DHD Controller ignores it and returns a minus sign (- >).
Table 7-1. S erial Command s
Command
Parameter
(min/max)
Value
S tored?
De s cription
Power On/Off Command s
OFF NA NA Turns display off
ON NA NA Turns display on
POWER 0/1 NA Turns display on and off
POWER? NA NA Returns power status
Input S election Command s
COMPONENT NA YES Selects the Component input
COMPOSITE NA YES Selects the Composite video input
HDMI1 NA YES Selects the HDMI 1 input
HDMI2 NA YES Selects the HDMI 2 input
HD1 NA YES Selects the RGB HD 1 input
HD2 NA YES Selects the RGB HD 2 input
INPUT? NA NA Returns active input
SCART NA YES Selects the SCART input
SVIDEO1 NA YES Selects the S-Video 1 input
SVIDEO2 NA YES Selects the S-Video 2 input