8.
8. Drape the net over the frame so
that the Rukket logo at the bottom is
right-side up and wrap the attaching
hooks at the top around the
Top
Cross Bar
and hook them to the thick
woven edge of the net.
NOTE:
If the
Top Cross Bar
is too
high to reach, adjust the frame to a
more suitable height.
Attach the hooks down the sides and
around the
Front Base
in the same
manner.
9. A. Run the doubled-up end of the
Bungie
cord through the thick woven
edge of the net.
The bungies should be placed between
the net’s attaching hooks.
Two bungies should be used on each
corner and two bungies should be used
on each side of of the pivot joint.
More bungies are included so that you
can customize how powerful you want
the ball return to be.
A.
B.
C.
D.
Questions? Give us a call! (1-855)-478-5538
9.
B. Run the plastic hook through the
loop of the bungie to form a hitch
around the net's thick woven edge.
D. Hook the plastic onto the net’s
thick woven edge next to where the
Bungie
is hitched.
C. Pass the plastic hook in front of
and around the metal frame.
Page 4