·
1 Product Overview
1.1 Technical Specifications
RG-AP530-I V2 wireless access point is one of the fruits of Ruijie
’s independent research and development. It can be
used as a Fit AP for networking, together with a wired and wireless integrated switch/ wireless controller. Also, it can be
used to form a network independently so as to provide wireless access service to users of a wireless VLAN.
Table 1-1 Technical Specifications of the RG-AP530-I V2
Hardware Specifications
Transmission
Protocol
2.4G: 802.11b/g/n;
5G: 802.11a/n/ac
Operating Frequency
802.11b/g/n: 2.4G ~ 2.4835GHz;
802.11a/n/ac: 5G: 5.150~5.350GHz, 5.47~5.725, 5.725~5.850GHz (Depending on the country
of use.)
Antenna Type
Built-in antenna system
Spatial Streams
3
Transmission Rates
2.4G: up to 450 Mbps
5G: up to 1.3 Gbps
Up to 1.75 Gbps per AP
Modulation
Technique
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, and [email protected]/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM
Receiver Sensitivity
11b: -99dBm (1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps)
11a/g: -93dBm (6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), -77dBm(54Mbps)
11n: -92dBm@MCS0, -74dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15
11ac HT20: -90dBm (MCS0), -65dBm(MCS8)
11ac HT40: -85dBm (MCS0), -60dBm(MCS9)
11ac HT80: -82dBm (MCS0), -58dBm(MCS9)
Transmit Power
20dBm
Depending on the country of use, laws and regulations.
Minimum Adjustable
Unit of Power
1dBm
Dimensions
(W x D x H)
205mm × 205mm ×42mm
Weight
0.7kg
Service Ports
one 10/100/1000Base-T Ethernet port (PoE-capable)
one 10/100/1000Base-T Ethernet port
one USB 2.0 port (Supports expansion of the USB network adapter or USB storage.)
Management Port
one RJ45 console port
LED
1 LED (red, green, blue and orange light for solid mode, flashing mode, or breathing flashing
mode, and the indicator can be switched off to silent mode)