Ruijie RG-AP530-I V2 Series, Installation And Reference Manual, Page: 14 / 27

·

Install the device indoors.

Do not expose the device in a thunderstorm or strong electric field.

Keep the device clean and dust-free.

Disconnect the device before cleaning it.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the AP is working.

Fasten the device tightly.
3.4 Installing the Access Point

Ceiling Mount
1. Drill four 6 mm diameter holes (61 mm apart) on the ceiling. Tap wall anchors into the holes, and drive screws
through the mounting bracket into the anchors to fix the bracket. See Figure 3-1.
Figure 3-1 Attaching the Mounting Bracket on the Ceiling
2. Align the square feet on the rear of the AP over the mounting holes on the bracket. See Figure 3-2.
Figure 3-2 Aligning the Square Feet with the Mounting Holes
Before mounting the AP on the bracket, you must first install the Ethernet cables.
3. Slide the AP onto the bracket in the direction along the arrow on the mounting bracket until it clicks into place. See
Figure 3-3.