Hardware Installation and Reference Guide
Overview
22
Item
Description
System
status
indicator
System status indicator. The statuses are as follows:
Solid green: The system is operational.
Off: The switch is powered off.
Port status indicator
RJ-45 port status indicator. The statuses are as follows:
Solid orange: The port is connected at 10/100 Mbps.
Blinking orange: The port is receiving or sending traffic at 10/100
Mbps.
Solid green: The port is connected at 1000 Mbps.
Blinking green: The port is receiving or sending traffic at 1000
Mbps.
Off: The port is not connected.
Port mode switch-over button
Support switchover in four modes:
Flow Control On
Flow Control Off
Port Isolation. When this mode is enabled, ports 1-22 are isolated
from each other, and can communicate with ports 23-24.
Extend Data Transmission-10Mbps. When this mode is enabled,
ports 1-8 have a reduced speed of 10 Mbps, with a transmission
distance of up to 250 m. (Note: If compatibility is considered,
some ports may not may not deliver such a transmission
distance.)
RJ-45 10/100/1000Base-T
auto-sensing Ethernet port
10/100/1000Base-T adaptive Ethernet port. The copper port uses an RJ45
connector.
1.6.4
Ports - Rear Panel
Figure 1-15 shows the rear panel of an RG-ES124GD switch. For detailed meanings of numbers 1 to 2, see the
following table.
