Installation and Reference Guide
40G QSFP+ Modules
QSFP+
(Perlane)
QSFP+
40G-AOC-5M
Active
QSFP+
to
QSFP+
5
\
4lanes x 10.3125G
(Perlane)
No
40G-AOC10M
Active
QSFP+
to
QSFP+
10
\
4lanes x 10.3125G
(Perlane)
No
40G-AOC-20M
Active
QSFP+
to
QSFP+
20
\
4lanes x 10.3125G
(Perlane)
No
40G-AOC-30M
Active
QSFP+
to
QSFP+
30
\
4lanes x 10.3125G
(Perlane)
No
The TX power of 40G-AOC-
XM cable can be displayed as “N/A”. You can monitor the local TX power via the
peer TX power.
Additional connecting cables are not needed. You just need to plug the cable ends into the appropriate
device ports for interconnection.
Table 5-4 Temperature/Humidity Requirements for the Modules
Operating Temperature
0ºC to 70ºC
Storage Temperature
-40ºC to 85ºC
Relative Humidity
10% to 90%
The types/models of QSFP+ modules are being updated. If more accurate models of the module are
required, please contact Ruijie marketing staff or technical support engineers.
Module Specifications
Wavelength
Wavelength means the wave band for transmission of light signal.
Optical Fiber Type
Optical fibers are classified into two types: single-mode and multimode fibers according to the transmission mode of light
in fibers.
A multimode fiber (MMF) has a larger core and can transmit light of various modes. But it has a higher modal dispersion.
The modal dispersion grows with the increase of transmission distance. The transmission distance of multimode fibers is
associated with the transmission rate, core diameter, and modal bandwidth. Please read the instructions for reference.
